Taxation in the 3D Printing Industry (FDM only :)

Taxation in the 3D Printing Industry (FDM only :)



This is for the "3D Printer"
Printing machinery used for printing by means of plates, cylinders and other printing components of heading 84.42; Printers [other than machines which perform two or more of the functions of printing, copying or facsimile transmission] capable of connecting to an automatic data processing machine or to a network printers [other than copying machines, facsimile machines]; parts and accessories thereof [other than ink cartridges with or without print head assembly and ink spray nozzle]
HSN-8443
GST
18%
This is for the filament and 3D Printing services respectively with "FDM" only:

Moulding, pressing, stamping, extruding and similar plastic manufacturing services
SAC-998920
18% GST
Monofilament of which any cross-sectional dimension exceeds 1 mm, rods, sticks and profile shapes, whether or not surface-worked but not otherwise worked, of plastics
HSN -3916
18% GST
Industrial Machinery (2)
This is for the "nozzle" if sold separately
Printers which perform two or more of the functions of printing, copying or facsimile transmission, capable of connecting to an automatic data processing machine or to a network printers; copying machines, facsimile machines; ink cartridges with or without print head assembly and ink spray nozzle
HSN -8443
GST28%



With all the updates in the Indian economic policies and financial jurisdiction, this is a quick gist of the new taxes applicable for our services so that you as our customer is better informed!

Thank you :D
Support Team,
Fracktal Works

    • Related Articles

    • Design for For FFF

      Please refer this article for info on Design optimization for FFF printing hubs.com/knowledge-base/how-design-parts-fdm-3d-printing/
    • Buying a 3D printer.

      3D printing technology is broadly classified into FDM, SLA and SLS printing. We at Fracktal works Manufacture and sell machines related to FDM and SLA. If you need parts printed using SLS you can use our Fractory service. We have mentioned few of the ...
    • Popular Articles

    • SMPS not turning ON

      SMPS may not turn because of these reasons. 1. SMPS is not getting power supply. 2. SMPS is spoilt 3. SMPS is detecting a short in machine circuit and is auto Shutting. Troubleshooting: Note: Checking SMPS input when machine is on is risky task. You ...
    • Layer Shifting caused by pulley slipping down

      Motor Pulley is mounted on Motor shaft with the help of a grub screw. The pulley acts as a bridge for transferring the motors rotary motion to the belts. The motor pulley comes under high stresses and sometimes may get displaced. The displacement of ...
    • Troubleshooting Limit switch issues.

      Fracktal 3d Printers come with 3 Limit switches. X axis  Y axis Z axis Whenever these switches fail the printer faces certain issues like not being able to move in certain direction or going and crashing at the edges. Below we have listed out the ...
    • Pro Maintainance

      Maintainance
    • Buying a 3D printer.

      3D printing technology is broadly classified into FDM, SLA and SLS printing. We at Fracktal works Manufacture and sell machines related to FDM and SLA. If you need parts printed using SLS you can use our Fractory service. We have mentioned few of the ...
    • Recent Articles

    • Removing carriage board - Julia Extended.

      Carriage board is a small board mounted on the carriage. To remove the carriage board follow the steps below. Note: Remove filament before removing carriage cover. 1. Remove carriage cover. The carriage cover is fastened by 2 screws. Please be ...
    • Sending Gcode to Fracktal care for troubleshooting.

      Analysing the Gcode is one among the primary steps done while troubleshooting issues. The gcode which may be fine in your system may get corrupted while uploading to your printer. To make sure this corruption has not happened we recommend analysing ...
    • Material (filament) storage SOP

      3D printing filaments are hygroscopic in nature. PLA Nylon and PVA are extremly hygroscopic and storing them in air tight containers with dessicants is a must. Other filaments also need to be stored in air tight container but can be exposed to ...
    • SMPS not turning ON

      SMPS may not turn because of these reasons. 1. SMPS is not getting power supply. 2. SMPS is spoilt 3. SMPS is detecting a short in machine circuit and is auto Shutting. Troubleshooting: Note: Checking SMPS input when machine is on is risky task. You ...
    • Changing SMPS- Extended.

      Fractal Printers are designed with serviceability in mind. Changing SMPS in Julia Extended can be done with the help of a + Screw driver and 2.5mm Allen key (Allen Key is provided with the Accessory box).  Steps to replace SMPS: 1. Switch off the ...